Motorcycle Comfort Seat Cushion Pillow Pad Cover Pressure Relief Universal

Description

Product Description:
Package including: cover, attachment loops, cruiser straps,
Material: polyester fiber (3D mesh cloth) TPU (airbag)
Package include: Airbag/Cover/Air pump
Size:L about 30*31cm/12.6*12.6in
XL about 37.5*36cm/14.76*14.17in
Features:
Improves fit on the bike.
Redesigned cell geometry improves airflow under the rider.
More longer, more comfortable rides.
A narrow front to match the seat profile of most Dual Sport Bikes.
The front of the DS pad is also tapered down to minimize unwanted pressure on front leg passage.
Unique inflatable design for the ultimate in comfortable seating and vibration absorption.
Made from polyurethane and features a breathable, stretchable outer cover and a nonskid urethane base to protect your seat.
Features open-mesh side panel to allow air circulation through.
Individual air cells, creating extra ventilation to reduce heat buildup.
Eliminates painful pressure points and promotes consistent blood flow for a longer, more comfortable ride.
Fitments:
Universal for motorcycle
For Touring Adventure Cruiser Street bike
For Honda CBR600 CG
For Kawasaki ninja400 Z800 Z650 Z750 Z900 Versys 650
For BMW R1200GS F800GS R1200RT
For Suzuki GSR750
For Benelli BJ600
For YAMAHA MT07 MT09
For Honda Magna vfr1200f Goldwing DCT Trike
For BMW K1200Gt K1600GTL R1200RT
For Can-Am Ryker Rally
For Road Glide Victory Spyder F3 Limited Street Glide
For Versys 650
For Suzuki Burgman 650
For Yamaha FJ-09 VStar 1300 Deluxe vStar 950 cruiser
For Suzuki Bergman 400 K7
For Max scooter
For Vespa
For Scooter
etc.
Installation Method:
1. Turn the buffer valve counterclockwise to open.
2. Inflate with a pump air cushion until the air cushion is full of air
3. Turn the valve clockwise to close
4. Place the air cushion on the motorcycle with the air cushion facing up. Sit in the seat in a normal sitting position. Put your feet on the hooks.
5.Adjust the air by opening the fill valve and releasing air until you sink down into the cushion. Close fill valve. Ideal inflation is about 1/2 inch off the seat. If you bottom out on the base of the seat, add more air through the fill valve and adjust again. Do not overinflate. This product works most effectively with a minimal amount of air.
6.Turn the valve clockwise to close. You can check that you have not let all the air out of the cushion by slowly leaning your body (not necessarily your bike) from side to side. You should be able to feel the air transferring beneath you slightly. If too much air is transferring beneath you, let more air out of the cushion.
Packing List:
Airbag*1
Cloth cover*1
Pump*1
On Oct 7, 2022 at 08:06:08 PDT, seller added the following information: